Obsolete Inventory: How to Identify It, Reserve for It and Write It Off
How manufacturers identify obsolete and excess inventory, calculate a defensible reserve, record the journal entries and time the tax deduction at year-end.

Quick answer: Find obsolete inventory with a last-used and months-of-supply review, reserve for it on your books using a written aging-matrix policy, and take the tax deduction when you actually scrap, sell or donate it, or offer it at a reduced price within 30 days after your inventory date. A book reserve alone generally isn't deductible.
Obsolete inventory is stock you don't expect to use or sell at a normal price anymore. Common examples:
- parts for discontinued products
- old revisions
- material for a customer program that ended
- quantities far beyond any realistic demand
Handling it right takes three steps. Find it with an aging and usage review. Reserve for it on your books, so inventory shows what you can realistically recover. Write it off when you actually scrap, sell or donate it.
Taxes work on a different clock. A reserve on your books generally isn't deductible until you dispose of the goods or offer them for sale at a reduced price. That's why year-end is when to act.
This is general information, not tax or accounting advice. Work with your CPA on your specific facts.
Excess, slow-moving and obsolete: what's the difference?
| Category | What it means | Typical treatment |
|---|---|---|
| Slow-moving | Still used, just turning much slower than normal | Watch it; partial reserve if it keeps aging |
| Excess | Usable, but you have more than demand will use in a reasonable time (often 12–24 months) | Reserve the part beyond expected usage |
| Obsolete | Can't be used or sold at a normal price | Reserve down to scrap or resale value, then get rid of it |
Many manufacturers find they have a lot more excess than truly obsolete stock. Excess is where cash quietly gets tied up, which is why inventory carrying costs matter as much as the write-off itself.
How do you identify obsolete inventory?
Pull these from your ERP or inventory system, or build them in a spreadsheet from item history:
- Last-used or last-sold date by item. No movement in 12 months deserves a look. Nothing in 24 months is a strong sign it's obsolete.
- Months of supply. On-hand quantity divided by average monthly usage or forecast demand. Anything beyond 12–24 months is excess for the portion above that.
- Engineering changes. Old revisions, parts on discontinued bills of materials, components replaced by a new design.
- Customer program status. Stock you built or bought for a program that ended, or for a customer you don't serve anymore.
- Condition. Damaged, expired, rusted or out-of-spec material found during the count or cycle counting.
- Count sticker colors. If you use a different-colored sticker for each year's physical count (say blue for 2024, red for 2025 and green for 2026), anything still wearing an old color hasn't moved since that count, and you can spot it walking the floor. This is especially useful if you run on QuickBooks instead of a full ERP, since most QuickBooks setups can't report a last-used date by part. Our year-end physical inventory count checklist explains how to set it up.
- Falling inventory turns. A drop in turns by product line usually points to where the problem is.
Then sit down with operations, purchasing and sales and go through the list together. Accounting can flag the items. Only the people who know the product and the customers can say whether something will really get used.
Example: measuring excess on one part
| Item | Bracket, part 4471 |
|---|---|
| On hand | 6,000 units at $8.50 = $51,000 |
| Average usage | 250 units a month |
| Months of supply | 24 |
| 12 months of expected usage | 3,000 units |
| Excess beyond 12 months | 3,000 units = $25,500 |
Those extra 3,000 brackets aren't worthless. But they won't get used for two years, and if the design changes they may never get used. That's what the reserve is for.
How do you calculate an obsolete inventory reserve?
There's no required percentage. The reserve should bring inventory down to what you realistically expect to recover, based on your own history: how much aged stock eventually got used, sold at a discount or scrapped.
A simple approach that holds up is an aging matrix plus specific identification. Here's an example:
| Months since last use | Inventory cost | Reserve % | Reserve |
|---|---|---|---|
| 0–6 | $1,700,000 | 0% | $0 |
| 7–12 | $350,000 | 10% | $35,000 |
| 13–24 | $200,000 | 35% | $70,000 |
| Over 24 | $100,000 | 75% | $75,000 |
| Specifically identified obsolete (customer program ended) | $50,000 | 100% | $50,000 |
| Total | $2,400,000 | $230,000 |
The percentages are just for illustration. Set yours by looking back. Of the inventory that was 13–24 months old two years ago, how much did you eventually use at full value, and how much did you scrap or sell cheap? Put the method in a short written policy and apply it the same way every quarter. Consistency is what makes a reserve believable to auditors and banks.
If you already have $140,000 reserved, this quarter's adjustment is $90,000, charged to cost of goods sold.
One caution: once you reserve against items you still hold, that lower amount becomes their new cost basis. Don't release the reserve just because next quarter's matrix comes out lower. Release it only as those items get used, sold or scrapped.
What are the journal entries?
| Event | Debit | Credit |
|---|---|---|
| Record or increase the reserve | Cost of goods sold (inventory obsolescence) $90,000 | Inventory reserve (contra-asset) $90,000 |
| Scrap reserved items that cost $50,000 | Inventory reserve $50,000 | Inventory $50,000 |
| Sell reserved items that cost $20,000 for $3,000 cash (already reserved $17,000) | Cash $3,000; Inventory reserve $17,000 | Inventory $20,000 |
I'd keep the reserve in a separate contra account rather than writing down item costs in your ERP until you actually get rid of the goods. That keeps your standard costs and item history clean, and the reserve is easy to review.
On the GAAP side (ASC 330), inventory measured on FIFO, average or standard cost is carried at the lower of cost and net realizable value; LIFO and the retail method use lower of cost or market. Once inventory is written down at year-end, the lower amount is its new cost, and you don't write it back up if prices recover. Our post on FIFO, LIFO and average cost explains how your valuation method fits in.
When can you deduct obsolete inventory for taxes?
This is where book and tax split, and where year-end timing matters.
- A reserve on your books generally isn't deductible. In Thor Power Tool Co. v. Commissioner, 439 U.S. 522 (1979), the Supreme Court upheld the IRS in disallowing a formula-based write-down of excess spare parts. The company had kept the parts and kept selling them at their original prices, so there was no objective evidence their value had dropped.
- Getting rid of it creates the deduction. Scrapping, destroying or selling the goods generally lets you take the loss in the year it happens. Keep scrap tickets, scrap-dealer receipts, photos and a signed disposal list.
- Donations work differently. The cost comes out of cost of goods sold and becomes a charitable deduction, which has limits. For C corporations, starting in 2026, only contributions above 1% of taxable income are deductible, up to a 10% cap. Qualifying donations to charities that serve the ill, needy or infants may get an enhanced deduction under §170(e)(3).
- Damaged or unsellable goods can be written down. Treasury Regulation §1.471-2(c) allows goods you can't sell at normal prices (damage, imperfections, style changes, odd lots and similar causes) to be valued at a bona fide selling price less direct costs of disposition. The price has to be shown by actually offering the goods for sale within 30 days after your inventory date. Raw materials and partly finished goods are valued on a reasonable basis, but never below scrap value. You carry the burden of proof, so keep records.
- Smaller businesses may use simplified methods. For tax years beginning in 2026, businesses (other than tax shelters) with average annual gross receipts of $32 million or less over the prior three years, counting related entities together, can generally use simplified inventory methods under §471(c) and skip UNICAP under §263A(i). The 2025 tax law didn't change that threshold. How write-downs work under those methods depends on the method you've adopted, so confirm it with your CPA.
So what should you actually do? If you've found stock you'll never use, scrap it before year-end. That can move the deduction into this year. Selling it, or offering it at a reduced price, can do the same. Offers have to be made no later than 30 days after your inventory date, and you need to document them. Reduced-price write-downs generally aren't available for inventory you value under LIFO.
Coordinate all of this with your manufacturing tax strategy and the rest of your 2026 tax changes for manufacturers. Give your CPA the support they'll ask for; our page on how we work with your CPA describes that handoff.
Why does it matter beyond the tax return?
- Your gross margin is overstated until you reserve. Carrying dead stock at full cost makes margins look better than they are. Then someone finally cleans it up, often during a sale or an audit, and you take one big hit.
- Your bank cares. The OCC's handbook for bank examiners on asset-based lending says inventory should be excluded from collateral because of age or obsolescence, so aged stock often doesn't count in a borrowing base. A clear reserve policy is a much better conversation than having the bank find the problem in a field exam.
- It shows where purchasing and planning break down. Obsolete stock usually comes from three places:
- minimum order quantities
- engineering changes released without using up the old revision
- customer forecasts that never showed up
Fixing the cause is worth more than the write-off.
A year-end obsolete inventory checklist
- Pull the aging and months-of-supply reports before the physical count.
- Go through the list with operations, purchasing and sales. Mark each item keep, reserve, sell or scrap.
- Tag and separate scrap items so they don't get counted as good stock.
- Offer sellable items at reduced prices to liquidators, the original supplier or other manufacturers, and keep proof of the offers and dates.
- Scrap or donate what has no value, and keep the disposal records.
- Update the reserve using your written policy and book the entries.
- Give your CPA the reserve calculation, disposal records and any reduced-price offers.
- Fix the cause. Review minimum order quantities, engineering change procedures and customer-specific stocking agreements.
If you'd like a controller to run this review every quarter instead of once a year, it's part of our outsourced controller and manufacturing accounting services. To keep the build-up from happening in the first place, see improving inventory efficiency through cost optimization.
Frequently Asked Questions
Is obsolete inventory tax deductible?
Generally yes, but usually when you get rid of it (scrap, sell or destroy it), not when you book a reserve. Goods you can't sell at normal prices may be written down to a bona fide selling price if you actually offer them for sale within 30 days after the inventory date. Donated inventory becomes a charitable deduction with its own limits. Confirm the treatment with your CPA.
What is the journal entry for an obsolete inventory reserve?
Debit cost of goods sold (or an inventory obsolescence account within cost of sales) and credit an inventory reserve. The reserve is a contra-asset that reduces inventory on the balance sheet. When you dispose of the items, debit the reserve and credit inventory.
What percentage should an obsolete inventory reserve be?
There's no standard percentage. Base it on your own history of how much aged inventory eventually gets used, sold at a discount or scrapped. Apply it with an aging matrix plus specific identification, and write the policy down so it's applied the same way every time.
Can an inventory write-down be reversed?
Not under US GAAP once it's recorded at year-end. The lower amount becomes the item's new cost. The reserve comes off only as the reserved items are actually used, sold or scrapped.
What's the difference between an inventory write-down and a write-off?
A write-down reduces inventory to a lower value while you still have it. A write-off removes it completely, usually because it was scrapped, lost or disposed of. A reserve is the usual way to record a write-down without changing item-level costs.
More on: Cost Accounting · Manufacturing Tax Strategy

